Custom Mould Components Plastic Mould Manufacturers
Die Mold Components' Characteristics:
1. Wear resistance
When the blank is plastically deformed in the mold cavity, it both flows and slides along the surface of the cavity, causing severe friction between the surface of the cavity and the blank, resulting in the failure of the mold due to wear. Therefore, the wear resistance of the material is one of the most basic and important properties of the mold.
Hardness is the main factor affecting wear resistance. In general, the higher the hardness of the mold parts, the smaller the amount of wear and the better the wear resistance. In addition, wear resistance is also related to the type, quantity, shape, size and distribution of carbides in the material.
2. Strong toughness
Most of the working conditions of the mold are very bad, and some often bear a large impact load, which leads to brittle fractures. In order to prevent sudden brittle fracture of mold parts during operation, the mold must have high strength and toughness. The toughness of the mold mainly depends on the carbon content, grain size and organizational state of the material.
3. Fatigue fracture performance
During the working process of the mold, fatigue fracture is often caused by the long-term action of cyclic stress. Its forms include small-energy multiple impact fatigue fracture, tensile fatigue fracture, contact fatigue fracture and bending fatigue fracture. The fatigue fracture performance of the mold mainly depends on its strength, toughness, hardness, and the content of inclusions in the material.
Die Mold Components Specifications:
| Keywords | Die Mold Components |
| Place Of Origin | Dongguan China |
| Model Number | Customized |
| Product Material | Metal |
| Application | Machining |
| QC System | 100% Inspection Before Delivery |
| Delivery Time | 3-7days |
| Surface Treatment | Blacking/Chrome/Zincplating/DLC/TICN/Oxidation |
Wire EDM Technology For Die Mold Components:
Wire cut Electrical Discharge Machining (WEDM), sometimes called wire cutting. Its basic working principle is to use a continuously moving thin metal wire (called electrode wire) as an electrode to perform pulse spark discharge on the workpiece to remove metal and cut it into shape.
Wire EDM technology is a kind of special processing, which is different from traditional processing technology, which requires mechanical force and mechanical energy to cut, and mainly uses electric energy to realize the processing of materials. Therefore, WEDM technology is not limited by material properties, can process any material with hardness, strength, and brittleness, and occupies a critical position in machining at the current stage.
Product Tags:
|
|
Strong Toughness Metal Injection Molding Components Wear Resistance Images
|
